============================================================ (Specifications subject to change without notice) Maxtors' DiamondMax(TM) 60 Family 3.5" EIDE / Ultra DMA/66 Drives Model Numbers 96147U8, 94610U6, 93073U4, 92305U3, 92049U3, 91536U2, 91023U2 ============================================================ KEY FEATURES: * Offers up to 60 GB of Storage * Supports Ultra Mode 5 for up to 66 MB/sec data transfers * 5,400 RPM Spin Speed * 2 MB Cache Buffer * <9.0 ms average seek * 3-year warranty SECTOR ADDRESS TRANSLATION: +---------+--------+----+---+-----+-----------+ | Model | CYLS | HD |~LZ| SPT | Capacity | | Number | * | |&WP| | ** | +---------+--------+----+---+-----+-----------+ | 96147U8 | 16,383 | 16 | 0 | 63 | 61,470 MB | +---------+--------+----+---+-----+-----------+ | 94610U6 | 16,383 | 16 | 0 | 63 | 30,760 MB | +---------+--------+----+---+-----+-----------+ | 93073U4 | 16,383 | 16 | 0 | 63 | 25,620 MB | +---------+--------+----+---+-----+-----------+ | 92305U3 | 16,383 | 16 | 0 | 63 | 20,490 MB | +---------+--------+----+---+-----+-----------+ | 92049U3 | 16,383 | 16 | 0 | 63 | 20,490 MB | +---------+--------+----+---+-----+-----------+ | 91536U2 | 16,383 | 16 | 0 | 63 | 15,360 MB | +---------+--------+----+---+-----+-----------+ | 91023U2 | 16,383 | 16 | 0 | 63 | 10,240 MB | +---------+--------+----+---+-----+-----------+ * For any BIOS using the CHS (normal, or large) translation mode, the maximum cylinder value is 16,383. The CHS mode limits the BIOS to being able to address a maximum drive size of 8.4 larger than 8.4 GB the BIOS must support the Logical Block Address (LBA) mode. LBA uses the MAXLBA value as the addressing method to access the cylinders on drives larger than 8.4 GB. Both the mother board and the Operating System (OS) must support extended interrupt 13 (Xint 13) in order to prepare, format and access information on any drive larger than 8.4 GB. In newer computer systems, the BIOS (CMOS) settings include an "Auto" entry. If your system supports it, select "Auto" and enable the "LBA" (Logical Block Addressing) Mode. Then let the system auto detect the drive parameters. If your system does not support LBA, then you may require a BIOS Upgrade, an Extended BIOS EIDE adapter card, or Maxtor's Free "MaxBlast" HDD Installation Software. ~ The fields LZ (Landing Zone) and WP (Write Pre-compensation) are not used by Maxtor drives and the values may be either 0 or the values set by the BIOS. ** Maxtor Defines One Megabyte (MB) as 10^6 or One Million Bytes (1,000,000) and One Gigabyte (GB) as 10^9 or One Billion Bytes (1,000,000,000). JUMPER DESIGNATION |J50|J48|J46|J44|J42| +-------------------------------------+---+---+---+---+---+ | Master/Slave | | | | | | | Only Drive in single drive system* | J | | | | | | Master in a dual drive system* | J | | | | | | Slave in a dual drive system | 0 | | | | | +-------------------------------------+---+---+---+---+---+ | Cable Select | | | | | | | Disabled* | | O | | | | | Enabled | | J | | | | +-------------------------------------+---+---+---+---+---+ | 4092 Cylinder Limitation | | | | | | | Disabled* | | | O | | | | Enabled | | | J | | | +-------------------------------------+---+---+---+---+---+ | Factory Reserved | | | | O | | +-------------------------------------+---+---+---+---+---+ | Factory Reserved | | | | | O | +-------------------------------------+---+---+---+---+---+ J=Jumpered O=Open *=Default Pin 1 J1 IDE Connector | J2 Power ___________ ________|_________________________ | .................... || @ * * o |/ \ | .......... ......... || @ o o o o || O O O O | |______________________||___________||_________| | | | | | | | | | | | | | | | | | | J50 Master/Slave -----' | | | | | | | `-+12V J48 Cable Select -------' | | | | | `---+12V Return J46 4092 Cyl Limitation---' | | | `----- +5V Return J44 Factory Reserved -------' | `------- +5V J42 Factory Reserved ---------' @ = Default Jumped Positions * = "Spare" Jumper Position o = Default Open Positions ============================================================ PERFORMANCE: Seek Performance (including settling time and servo overhead) Seek Times (Typical): Track to track: ....................... 1.0 ms Average: .............................. 9.0 ms Maximum: .............................. <20.0 ms Average Latency: ........................... 5.55 ms Rotational Speed (+-0.1%): ................. 5,400 RPM Controller Overhead: ....................... <0.3 ms Start Time (0 - Drive Ready) ............... <8.5 sec DATA TRANSFER RATE: To/From Interface (UDMA/66): ............. Up to 66.0 MBs To/From Media: ........................... Up to 40.8 MBs DRIVE CONFIGURATION: Integrated Controller/Interface: ........... ATA-5/Ultra DMA 66 Buffer Size: ............................... 2 MB Buffer Type: ............................... SDRAM Data Zones per Surface: .................... 16 Bytes per Sector/Block: .................... 512 Reliability Specifiacations Annual Return Rate: ................ < 1.0 % Start/Stop Cycles: ................. 50,000 (minimum) Component Design Life: ............. 5 years (minimum) Data Errors (non-recoverable) ...... <1 per 10^14 bits read POWER REQUIREMENTS (Average) Mode +12VDC+-10% +5VDC +-5% Power ---- ----------- ---------- ----- Spin-up (peak) 1800 mA 600 mA Seek 650 mA 550 mA 10.6 W Read/Write 250 mA 550 mA <5.8 W Idle 250 mA 500 mA <5.3 W Standby 20 mA 200 mA <1.3 W ENVIRONMENTAL: Temperature Operating (stabilized)............. 5 C to 55 C Non-operating/Storage ............. -40 C to 71 C Relative Humidity (Non-Condensing) Operating, Non-operating/Storage .. 5% to 95% Wet Bulb .......................... 30 C Maximum Altitude (relative to sea level) Operating ......................... -200 to 10,000' Non-operating ..................... -200 to 40,000' Shock & Vibration (typical) Operating, Random ........ 10-45 Hz @ 0.004 G2/Hz 48-62 Hz @ 0.008 G2/Hz 65-300 Hz @ 0.004 G2/Hz 301-500 Hz @ 0.0006 G2/Hz (no errors) Non-Operating Mechanical Shock ......... 10-2,000 Hz @ 2.15 Grms (no damage) Operating, swept sine (.25 octave/minute) 10-300 Hz ..................... 1.0 Peak Amplitude SHOCK: Operating Mechanical Shock ........... 30 Gs, 2 ms (no errors)* Non-Operating Mechanical Shock ...... 250 Gs, 2 ms (no damage)* * Without non-recoverable errors ACOUSTICS: Idle Mode ..................... 3.1 bel (avg. sound power) PHYSICAL: Height: 1.02 in 2.61 cm Length: 5.78 in 14.70 cm Width: 4.00 in 10.16 cm Weight: 1.30 lb. 0.59 kg ============================================================ DiamondMax, DiamondMax(TM) 60 96147U8, 94610U6, 93073U4, 92305U3, 92049U3, 91536U2, 91023U2 are Trademarks of Maxtor Corporation Specifications subject to change without notice Copyright 2000 Maxtor Corporation Rev A 5/4/00 J. LAWLEY